Permanent
Leveling
Swirls, scratches, and oxidation are not "stains" on the paint. They are valleys in the clear coat. We don't fill them. We level the surrounding surface to remove them permanently.
The Protocols
Enhancement
A single machine polishing pass designed to boost gloss and reduce light wash marring by 40–60%. This is a cosmetic improvement, not a full correction.
- Decon Wash + Clay Bar
- 1-Step Machine Polish
- Gloss Amplification
- 1-Month Sealant Included
Two-Step
The industry standard for restoration. Step 1 (Compound) cuts deep to remove moderate defects. Step 2 (Polish) refines the surface for maximum optical clarity.
- Heavy Cut Compound Stage
- Fine Polish Stage
- Removes Swirls & Etching
- 1-Month Sealant Included
Multi-Stage
Full clarity restoration. We chase perfection using multiple machine steps, spot sanding (if required), and jeweling polish. The "do it once, do it right" option.
- Wet Sanding (Spot)
- Rotary & DA Stages
- < 95% Defect Removal
- 1-Month Sealant Included
Subtraction,
Not Addition.
Many shops use "glazes" or "fillers" to hide scratches. This is temporary. The scratches reappear after a few washes.
We perform paint correction. This is an abrasive process where we remove a microscopic layer of clear coat (measured in microns) to level the surface until it is flat with the bottom of the scratch.
Once the paint is corrected, it is raw and exposed. It must be protected immediately with a Ceramic Coating or PPF.
Inspection Required
We cannot quote multi-stage correction over the phone. Every clear coat hardness is different. We require an in-person assessment under our studio lights to provide an accurate timeline.
Lock It In
Correction is expensive. Don't waste it. We strongly recommend pairing any correction service with a Ceramic Coating to "lock in" the flawless finish for years.
View Ceramic PackagesCorrection, in progress
Stop Hiding Defects
Remove them. Permanently. Bring your vehicle in for a paint depth analysis.